How to Use:

​

1. For high-quality application, remove all impurities from mating surfaces. Use appropriate solvent (preferably residue-free solvent) to clean and dry all relevant contact areas
    

2. Shake High Strength Threadlocker bottle well before each use.
    

3. Remove cap and cut nozzle tip to appropriate size for application
    

4. Apply to threaded areas and assemble parts. Refer to Technical Data Sheet and/or service manual for further information.
    

5. Replace cap on bottle and store as specified on product label
    

**NOTE: Threadlocker recommended for metal parts. It is not suggested for plastics. Cured product must be heated to 150°C before parts will detach. Please refer to relevant owner/service manuals to verify if this product to appropriate for application.

​