How to Use:

​

1. For high-quality application, remove all impurities from mating surfaces. Use appropriate solvent (preferably residue-free solvent) to clean and dry all relevant contact areas.
    

2. For best results, apply an even and constant bead with a flow width of 2 – 6mm of the gasket maker to the surface (surrounding all appropriate holes and rivets). Assemble parts by finger tightening all fasteners until silicone begins to exit out around the flange. Let the assembled structure to dry for one hour then retighten accordingly.
    

3. Buddyz Silicone Gasket Maker dries in 1 hour and will completely cure in 24 hours. Drying and curing times maybe be affected due to surface impurities and surrounding conditions.
    

4. Re-cap gasket maker after use. Clean hands and tools with appropriate cleaning products. Store as advised on product label.
    

**NOTE: Please refer to relevant owner/service manuals to verify if this product to appropriate for application. Not recommended for use on head gaskets or applications which contact with gasoline.

​